Applied-motion STM17R-3ND User Manual
Browse online or download User Manual for Hardware Applied-motion STM17R-3ND. Applied Motion STM17R-3ND User Manual
- Page / 2
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
STM
STM17R Quick Setup Guide
Requirements
▪ A small at blade screwdriver for conguring the DIP switches (included).
▪ DC Power Source, 12-48VDC
▪ For more detailed information, please download and read the STM17R Hardware Manual, available at www.applied-motion.com/support/manuals.
To begin, make sure you have the following equipment:
Step 1
Connect the drive to the DC power source. The STM17R will accept DC
power from 12-48VDC.
Per the diagram at the right, connect the red wire to the positive output
terminal on the power supply, typically marked V+, and the black wire to
the negative terminal, typically marked V-.
(Do not apply power until all connections to the drive have been made)
Step 2
Connect input signals to the drive. STEP and
DIR are required, EN and OUT are optional.
▪ See the STM17R Hardware Manual for circuit
connection details and examples.
STEP+
STEP-
DIR+
DIR-
EN+
EN-
OUT+
OUT-
N.C.
V-
V+
V+
V-
STEP+
STEP-
DIR+
DIR-
EN+
EN-
OUT+
OUT-
N.C.
V-
V+
V+
V-
NC
OUT-
OUT+
EN-
EN+
DIR-
DIR+
STEP-
STEP+
Set the motor’s idle current using switch 3.
▪ This is the percentage of running current that the motor will use when
the shaft is not rotating. Choose 90% for maximum holding torque or 50%
to reduce motor heating.
Step 4
3
50%
3
90%
Set the motor’s running current using switches 1 and 2.
▪ This is the percentage of full current that the motor will use when the shaft
is rotating.
Step 3
12
100%
12
90%
12
70%
12
50%
920-0055 rev B
1
2
Summary of Contents
Page 1 - STM17R Quick Setup Guide
STMSTM17R Quick Setup GuideRequirements ▪ A small at blade screwdriver for conguring the DIP switches (included). ▪ DC Power Source, 12-48VDC ▪ For
Page 2 - SMOOTHING
Optionally, you can test motor operation by activating switch 4 to initiate a self test move. ▪ The self test move continually rotates the motor for
Related products and manuals for Hardware Applied-motion STM17R-3ND
Hardware Applied-motion RS-232 User Manual
(320 pages)
(320 pages)
© 2020, manymanuals.com. All rights reserved. | 1.137 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals