User's ManualStep Motor Driversmotors • drives • controlsApplied Motion Products, Inc.404 Westridge Drive Watsonville, CA 95076Tel (831) 761-655
IntroductionThank you for selecting an Applied Motion Products motor control. We hope ourdedication to performance, quality and economy will make you
extspeedAmplifierOpticalIsolationcomstepdirenabletach+tach-cwwiperccwStepSequencerOscillator50% idleSTEP/SLEW JUMPERcurrent settingfull step/half step
-4--13-Choosing a Power SupplyVoltageCurrentThe maximum supply current you will need is the sum of the two phasecurrents. However, you will generally
+VDC-motorsupply12-35 VDC+–Connecting the MotorWarning: When connecting the motor to the driver, be sure that themotor power supply is off. Secure a
Using a Remote Speed Control PotentiometerThe 2035 O step motor driver includes an analog signal input connector that can be used to control the oscil
Using the OscillatorDrives with an O suffix are equipped with internal pulse generators that you can use to drive the motor. To set the drive to osci
-8- -9-.125AMPS/PHASECURRENTBASE =125mA1252505001000.25AMPS/PHASE.375AMPS/PHASE.5AMPS/PHASE.625AMPS/PHASE.75AMPS/PHASE.875AMPS/PHASE1AMPS/PHASE1.125AM
Comments to this Manuals